How to Rebuild the BCD in Windows

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

If this option is not specified, then BCDEdit operates on the system store. Sets the system store device. This only affects EFI-based systems. It does not persist across reboots, and is only used in cases where the system store device is ambiguous.

Creates a new entry in the boot configuration data store. Lists entries in a store. Verbose mode. Usually, any well-known entry identifiers are represented by their friendly shorthand form.

Specifies a one-time display order to be used for the next boot. Afterwards, the computer reverts to the original display order. Sets the global EMS settings for the computer. Since the BCD store exists and lists a Windows installation, you’ll first have to remove it manually and then try to rebuild it again.

At the prompt, execute the bcdedit command as shown and then press Enter :. The bcdedit command is used here to export the BCD store as a file: bcdbackup. There’s no need to specify a file extension. The command should return the following on screen, meaning the BCD export worked as expected:.

At this point, you need to adjust several file attributes for the BCD store so you can manipulate it. At the prompt, execute the attrib command exactly like this:. What you just did with the attrib command was remove the hidden file , read-only file, and system file attributes from the file bcd.

Those attributes restricted the actions you could take on the file. Now that they’re gone, you can manipulate the file more freely specifically, rename it. To rename the BCD store, execute the ren command as shown:. Now that the BCD store is renamed, you should now be able to successfully rebuild it, as you tried to do in Step 6. You could delete the BCD file entirely since you’re about to create a new one. However, renaming the existing BCD accomplishes the same thing since it’s now unavailable to Windows, plus provides you with another layer of backup, in addition to the export you did in Step 5, if you decide to undo your actions.

Try rebuilding the BCD again by executing the following, followed by Enter :. It should produce this in Command Prompt:. This means the BCD store rebuild is progressing as expected. At the Add installation to boot list? You should see this on the screen to show that the BCD rebuild is complete:. Restart your computer. Assuming that an issue with the BCD store was the only problem, Windows should start as expected.

Asked 4 years, 11 months ago. Modified 2 years, 3 months ago. Viewed 44k times. They are editing the so-called “BCD Store”. Where is it located physically? In filesystem where? On physical harddrive sectors where? On Flash ROM of computer? Somewhere else where? Improve this question. FastEthernet 4, 3 3 gold badges 25 25 silver badges 31 31 bronze badges.

Dims Dims Add a comment. Sorted by: Reset to default. Highest score default Date modified newest first Date created oldest first.

 
 

Bcd file for windows 10

 
replace.me › windows › windowsbcd-repair The Boot Manager in modern Windows versions uses the BCD (Boot Configuration Data).

 

[Bcd file for windows 10

 

Top 4 solutions are provided in this article to help you fix Windows 10 BCD errors. This crucial information in the Windows runtime environment will tell the Windows boot loader where to look for boot information.

So it is of great importance for loading and running operating system successfully. Where is the BCD file in Windows 10? Windows failed to start.

A recent hardware or software change might be the cause. There was a problem with a device connected to your PC. Error code: 0xce9. Your PC needs to be repaired.

The Boot Configuration Data file doesn’t contain valid information for an operating system. The Windows Boot Configuration Data file is missing required information. Take a rest, we will show you the top 4 ways step by step at the following description. So, in this section, we will show you the top 4 ways step by step to do Windows 10 BCD repair. Note: If you have a Windows installation disc, you could try the first 3 methods to manually repair BCD using command prompt.

Follow these steps to fix:. Put the Windows 10 installation disc in the computer, and start the computer to boot from this media. Change the boot order so that the computer can boot from the installation disc before it boots from the internal hard drives.

Select a language, a time, a currency, and a keyboard or another input method, and then click “Next”. Select your account and type in the password. Once you have completed the steps, the Startup Repair will start to scan, detect, and fix any problems that might prevent your Windows 10 from loading correctly.

If the startup repair method does not resolve the problem, you can rebuild the BCD store by using the Bootrec. Partition C: might not be the correct volume letter in your case, you have to locate the volume letter using DiskPart for the system partition where the BCD store is located.

Replace the right volume letter in these commands. The steps listed below:. Before you do, prepare an empty USB flash drive at least 16GB , a working Windows 10 computer has the same operating system as yours 32 bit or 64 bit. Hit Next. Select the system hard disk and choose Rebuild MBR at the drop down menu. Now, the Windows 10 BCD repair should be successful and the problem could never bother you again.

Now, you can choose a proper method to perform Windows 10 BCD repair based on your situation. Definitely, you could extend, split, move, format, resize, copy and delete partition if required. Or you could upgrade to Professional edition with all the advanced features, such as upgrade to Windows For server users, please take a look at the Server or Unlimited edition.

What is BCD in Windows 10? There are some situations that you might damage the BCD file, as follows: Extend the System Active Partition; An unexpected shutdown; Blue screen or other errors that require a restart; Hard drive failure; Virus attack. Error code: 0xce9 Your PC needs to be repaired. Follow these steps to fix: 1. Click “Repair your computer”. After this, you could check if you can boot into Windows If so, the problem has been solved.

The steps listed below: Before you do, prepare an empty USB flash drive at least 16GB , a working Windows 10 computer has the same operating system as yours 32 bit or 64 bit.

Still Need Help? Have your problem been solved? If not, please input query in the search box below.

 
 

[Bcd file for windows 10

 
 

Painless editing. Add, rename, remove, configure, and reorder entries at whim. Solve difficult problems. Powerful scripting with NeoGrub. You’ll have the power to hide partitions, change active flags, and create complex boot scenarios. Software similar to EasyBCD 7.

Rufus 3. One of the best tools to create bootable USB drives, the easy way. After you have determined the system partition volume, set the device element for Windows Boot Manager to the corresponding drive letter.

The following example sets device to drive S. If you’ve previously used Diskpart to get drive letters and then rebooted your PC, use Diskpart to check your drive letters again prior to running this command. Depending on your environment, drive letters could change so be sure that you’re setting the right partition.

The path element specifies the location of the Windows Boot Manager application on that volume. You can confirm that BCD-template has the correct path by enumerating the values in the store, as follows:. You should also specify the topmost Windows boot loader application in the Windows Boot Manager display order. The following example shows how to put a specified Windows boot loader at the top of the display order.

The next section discusses this identifier in greater detail. A multiboot system that has multiple installed operating systems has multiple instances of the Windows boot loader.

Each instance of the Windows boot loader has its own identifier. A BCD store has at least one instance, and optionally multiple instances, of the Windows boot loader. Locate the disk that needs repairing and choose Rebuild MBR. Step 5. After repairing, restart your computer. With this article, you can get simple and safe ways to fix the Boot Configuration Data file missing in Windows Some information required error in Windows 10 and other similar BCD errors. But you are not always able to repair various boot failure.

Thus, it is recommended you to back up system in advance. Way 1. Unlike the command used for the Windows Boot Manager, the “enum firmware” command lists all objects available in the BCD store, including any Linux installations.

Click Repair your computer. Click Troubleshoot. Click Command Prompt. Type: bcdedit. Press Enter. Select the Command Prompt button to start it. Launch Command Prompt available under Advanced Options. How to open file with BCD extension? Install Microsoft Registry Editor software.

Check the version of Microsoft Registry Editor and update if needed. Verify that the BCD is not faulty. Additionally, it lets you select the installations that you want to add to the BCD store. Use this option when you must completely rebuild the BCD store.

Type or copy-paste the following command, and hit the Enter key: bcdedit. In the output, find the identifier line for the entry you want to delete. This file contains information about the installed OS and boot parameters. Windows cannot boot normally if the BCD file is deleted or corrupted. Follow these steps: Click Start. Type msconfig in the search box or open Run.